Specifications

Station view Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
7-12 HiPath 3000 Manager E, Administrator Documentation
station.fm
Station Parameters
Discreet Call flag
This flag can be set to activate the discreet calling feature at a station. By using the code *945,
an authorized subscriber can then discreetly join an ongoing call. Only the discreetly called sta-
tion can hear the activated station.
This feature is only allowed if the call between the two stations is a simple connection between
two stations. It cannot be used in the case of consultation calls or conferences.
Discreet Call Protection flag
Activating this flag protects the station from the Discreet Calling feature.
Analog Station with CLIP flag
If this flag is activated, the call number for analog stations is transmitted (CLIP = Calling Line
identification Presentation). The following applies for Germany, Austria, Switzerland, etc.: An
incoming CLIP is always signaled between the first and second ring (see also CLIP protocol
ETSI FSK Type 1). This flag prevents the display from showing status changes such as those
that may result from transfer before answer, for example. Special characters are not displayed.
The flag can only be used if there are analog ports in the system.
For hardware restrictions, see System settings, Station view: Groups.
Last destination mailbox active flag
If this flag is activated and the called party is not available, the call is forwarded to the substitute
mailbox and the caller’s number is displayed on the substitute telephone.
Disable handsfree microphone flag
If this flag is activated, the handsfree microphone cannot be used.
Forced Number Presentation flag
If this flag is activated, the caller’s phone number - not name - appears on the called party’s
display.
Disable SNMP messages flag
If this flag is activated, no SNMP messages about the status of the connected telephones are
sent.
>
This flag is only supported by OpenStage phones.