Specifications

Station view Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
7-18 HiPath 3000 Manager E, Administrator Documentation
station.fm
Station Parameters
Call signaling Internal drop-down list
Every station can be assigned one of a total of eight possible internal ringing tones here. This
means that in addition to the external ringing tone, an internal ringing tone is assigned here and
subsequently transmitted for internal calls.
"Call signaling extern" drop-down list
Here you can select three ring types for external calls.
Standard This setting is intended for system and analog telephones.
Phone Mail
(Callno. 5-digits)
This is used when connecting PhoneMail to a communication system
with a numbering plan of up to five digits.
Phone Mail
(Callno. 6-digits)
This is used when connecting PhoneMail to a communication system
with a numbering plan of up to six digits.
Answer Machine With this setting, connected calls can be picked up via a DSS key. Be-
sides being selected for answering machines, this entry should also be
selected for pseudo (dummy) ports where no physical equipment has
been set up. This prevents the communication system from checking the
operating status of the port.
Fax Call override is not possible with this setting. It is reserved for fax ma-
chines only.
Loudspeaker This setting facilitates paging via the a/b port.
P.O.T MW LED (not
in the USA)
This setting should be selected for standard analog telephones (P.O.T =
Plain Old Telephone) with a message-waiting LED.
Door station with
pulsed loop
This setting should be selected if a terminal with pulse dialing is used.
Modem Call override is not possible with this setting. It is intended for modems.
P.O.T with VMWI This setting has to be selected for standard analog telephones (P.O.T =
Plain Old Telephone) which support CLIP and are equipped with the "Vi-
sual Message Waiting Indication" (VMWI) function. Telephones which
are equipped with VMWI indicate that a callback was activated for this
telephone.
If this setting is selected for an analog telephone which is not equipped
with VMWI, after a callback was executed, a ring tone sounds on the
telephone though there is no call.
>
When a fax or modem station is deleted (i.e., the call number and DID are deleted),
the extension type must also be reset to the default (standard).