Specifications

station.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
7-19
Nur für den internen Gebrauch Station view
Station Parameters
– System telephone
Ring type 1 = External call (e.g., double ring)
Ring type 2 = External call CO 2 (e.g., triple ring)
Ring type 3 = External call CO 3 (e.g., short/long/short)
– Analog telephones, Germany:
Ring type 1 = External call
Ring type 2 = Automatic recall
Ring type 3 = Doorbell ring
– Analog telephones, Other countries:
Ring type 1 = External call
Ring type 2 = External call
Ring type 3 = External call
Paging receiver (not in the USA) drop-down list
A paging system pocket receiver can be assigned to a station here. The index entered here re-
fers to the paging system call number table in the Paging.
Hotline, Mode, Hotline (Number)
The following options are available for selection in the "Hotline mode" selection list:
– "Off": The feature is deactivated.
– "Off-hook alarm after timeout": The call to the hotline takes place after a predefined
delay (off-hook alarm time). If the subscriber dials a digit before this interval has ex-
pired, the hotline is not called. The off-hook alarm time is set under Settings | System
Parameters | System settings / Area: Hotline, and may not be set to "0" when using
this option, see Section 9.8.3.8, “Area: Hotline”.
– "Hotline": The hotline number is called directly after the receiver is lifted at the tele-
phone in question.
In the Hotline drop-down list, you can set the hotline index (hotline number) to be used at the
relevant station.
Hotline numbers for the indexes and delay intervals can be set via System settings.
To change these settings, click on the arrow symbol after Hotline.
Payload Security
If this flag and the SPE support system flag are activated, the Signaling & Payload Encryption
(SPE) feature is supported for the selected subscriber(s). This means that the signaling and
payload data is encrypted for this/these subscriber/s.