Specifications

Station view Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
7-22 HiPath 3000 Manager E, Administrator Documentation
station.fm
Station Parameters
The non-mobile profile is needed for the initial logon (Home Logon) of an IP terminal. Mobile
Workpoint Clients may not be used for the home logon. In other words, every WorkPoint Client
must be initially registered as a non-mobile Workpoint Client.
If the Mobile blocked option has been activated for a Workpoint Client, a subscriber cannot
log on with a mobile Workpoint Client at that IP terminal.
When using a WLAN2 phone, the option Non mobile must be set before registering the WL2
phone with the communication system.
Redundancy Destination
The redundancy concept takes effect in cases where an application fails. The HFA client is then
forwarded to the redundant gatekeeper defined here. In order to define a redundant gatekeep-
er, the Redundancy Service Application (RSA) must be running in a HiPath 5000 network.
IP Address
Specify the IP address of the redundant gatekeeper for HFA clients here.
IP Address
Enter the IP address of the standby system.
7.2.3.2 Area: S0 / H.323 / SIP Client
In order to protect the communication system against SIP attacks from the LAN and the Inter-
net, the following behavior is predefined for setting up a SIP client:
● The "Authentication active" flag is activated by default.
● A password is generated automatically with random characters in the "Password" and "Val-
idate password" input fields. The administrator cannot read this password and is hence re-
quired to change it explicitly. The password has to be "strong" and with a length from 8 to
20 characters.
● The SIP-<extension call number> string is filled automatically into the "UserID" in-
put field.
"Authentication active" flag
You can define here whether the client requires authentication at the LAN card in order to be
used. This is specially relevant in the case of clients who are not on the internal LAN but who
are dialing in from the outside.