Specifications

File Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
8-8 HiPath 3000 Manager E, Administrator Documentation
file.fm
Transfer | HiPath 5000 RSM/AllServe Server
Area: Read/write database
Server->Manager, Manager->Server
Server->Manager is used to transfer the customer database from the server to the main mem-
ory of the PC.
Manager->Server is used to load the active customer databases from the PC to the server and
then automatically to the appropriate nodes.
The PC and the server can be the same machine. Depending on the communication system,
the transfer can take between two and six minutes.
Note that a read is always implemented first in order to have an error-free customer database
even if a transmission error should occur.
Delta mode
Delta mode can only be activated if a CDB is already loaded in your PC’s main memory.
When Delta mode is activated, only changes made since the customer database was last
downloaded are written to the communication system. If, for example, only a station name is
changed, then the transmission time is drastically reduced.
Hardware
Pressing the Hardware button causes the data of a particular memory area (ROM = Read Only
Memory) of the communication system to be overwritten by the customer database. To the
greatest possible extent, this data is hardware settings that are not to be changed by HiPath
3000 Manager.
It makes sense to select this field when exchanging the motherboard or when there are chang-
es in the HW configuration. Once the customer database has been loaded, the communication
system implements a hard restart, which synchronizes port allocation in the communication
system with the customer data that has just been imported.
The following data is overwritten:
– Baud rate of the V24 interfaces
– Call forwarding destinations in the CO
– Volume setting of the system telephone (loudspeaker and headset)
– Display setting of the system telephone
– Ringer volume of the system telephone
– Sent or received Info texts
7
When a customer database is downloaded from the communication system, it is al-
ways assigned the file name HiPathServerDB.net, and the node customer database
is named HiPathServerDBx.kds (where x corresponds to the number of the node in
question).