Specifications

file.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
8-9
Nur für den internen Gebrauch File Menu
Transfer | HiPath 5000 RSM/AllServe Server
– Telephone type, by port
– Card type, by slot
– Registration status of mobile telephones
– Serial number of mobile telephones
– ACD port assignment for ID recognition
Call charges
Pressing the Call charges button causes the contents of a particular memory area (RDI =
ReaD or Init) of the communication system to be overwritten by the customer database. This
data contains values that can be only read or initialized by HiPath 3000 Manager.
It makes sense to select this field when exchanging the motherboard so that all data can be
completely taken over or when resetting the following data in HiPath 3000 Manager:
– Call charges
– Counter for the features activated in the communication system
– Station codelock
The following data is also overwritten:
– External call forwarding destinations
– Activated call forwarding by station
– Messages sent (message waiting)
– Call forwarding destinations
– Code word for the release of the mobile telephone
– Cordless base station data
Area: Add/Delete Nodes
Add Node, Delete Node
These buttons are only enabled when nodes have been added or deleted. It is only via these
buttons that the changes made are also permanently implemented in the HiPath 5000 server.
See also:
– Section 4.1, “Starting up a New HiPath 5000 RSM/AllServe System”, on page 4-2
– Chapter 8, “File Menu”
– Section 8.2, “New | HiPath 5000 RSM/AllServe Server”, on page 8-4
– Section 8.19, “Transfer”, on page 8-25
– Section 8.19.36, “Security | User administration”, on page 8-101