Specifications

File Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
8-10 HiPath 3000 Manager E, Administrator Documentation
file.fm
New
8.5 New
An empty CDB is created by selecting New.
The CDB generated in this manner has no cards inserted, i.e., the card configuration must be
generated under Cards. Only then do station and line ports become visible in the correspond-
ing dialog boxes.
Customer data and system-wide
Selecting New from the File menu opens a wizard that allows you to create a new customer
database automatically.
You can enter customer-specific information in the Customer data dialog box, which appears
when you select this item.
You can define system-specific information in the System-wide dialog box, which appears
when you click the Next button.
File | New
>
To upload the customer database from the PC to the communication system, the
card configuration in the Software settings (System status | System-wide) must
match the actual hardware plugged into the system. If you require an actual status
of the hardware, trunks, or extensions, the customer database must be downloaded
from the communication system to the PC.
7
If you upload an automatically created customer database, you must reset the com-
munication system.
See also:
– Chapter 8, “File Menu”
– Section 9.10, “Settings | Network”, on page 9-294
– Section 10.1, “System-wide”, on page 10-2
– Section 10.1.1, “Cards”, on page 10-3