Specifications

File Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
8-22 HiPath 3000 Manager E, Administrator Documentation
file.fm
Append CDB to APS
8.14 Append CDB to APS
Append CDB to APS is used to append an existing CDB file (*.CDB) to an existing APS file
(*.FST, *.FLI). The new file created is an APS file with CDB data.
APS - Load File
Various source files (*.FST, *.FLI) can be selected here.
CDB - Load File
The corresponding CDB file can be selected here. The compatibility stamp and the hardware
variant must match in this case.
Save file
The file can be saved in the desired format here. The formats to be created depend on the
source file.
File | Append CDB to APS
Source file Target file
*.FST *.FST (transfer via HiPath 3000 Manager)
*.FLI *.FLI (transfer via TFTP (TCP/IP))
See also:
– Section 1.5, “File Types”, on page 1-15
– Chapter 8, “File Menu”
– Section 8.13, “Load APS Texts”, on page 8-21