Specifications

File Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
8-28 HiPath 3000 Manager E, Administrator Documentation
file.fm
Transfer
Disconnect following action
By default, the connection is automatically terminated after an action has been implemented
(e.g., Read/write database or Maintenance). It is not possible to terminate the connection for
ISDN and modem connections. This allows you to execute several actions sequentially (Read
customer database ->Event Log,...).
The connection must be released manually using the Hang up button, or – if no additional ac-
tions are executed – is automatically ended after an adjustable time. This time can be set under
Program options Communication.
Hang up
Releases/Terminates a modem or ISDN connection.
8.19.1.2 Error signaling option
If error signaling is active, incoming error messages are saved in the error file (*.err). The name
of the error file can be defined in Program Options I General. If no file name is specified, the
error messages are stored in the file ERRORSIG.ERR. In order to read the error file, the file
must be copied and then opened with a text editor.
Here, you can also activate an acoustic error warning.
When an error is detected, and error warning is active, a pop-up window appears with an ap-
propriate error message. The error is also indicated by an acoustic signal (every 5 seconds for
approx. 1 second) and by a flashing icon (flash rate: 500 ms) in the task bar. The acoustic warn-
ing and the flashing symbol can be deactivated using the Close button in the pop-up window
or by closing the pop-up window.
Start
If the Start button is pressed, HiPath 3000 Manager goes into receive mode for error messag-
es.
Minimize
The Minimize button can be used to minimize HiPath 3000 Manager to an icon on the desktop.
>
If the communication system could not send the same error message five times in
sequence (remote modem or remote PC not ready) this error message is only sent
when a new error occurs.