Manualshelf

Specifications

ManualsBrandsSiemens ManualsConsumer electronicsHiPath 3000 V3.0 or later Gigaset M1 Professional
171172173174175176177178179180
File Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
8-30 HiPath 3000 Manager E, Administrator Documentation
file.fm
Transfer
As in the case of a callback, only the destinations set up under Transfer | Callback connection
(with the option of manual suffix dialing on-site) can be reached.
The service call is primarily used after the initial startup of a communication system, e.g., when
the system data is not known at the remote center.
8.19.1.5 Read/write database, System -> PC, PC -> system option
Read/write database can be used to transfer the CDB from the communication system to the
PC (System -> PC) or to load the active CDB from the PC to the communication systems PC
-> system). Depending on the communication system, this procedure takes between two and
six minutes.
Note that a read is always implemented first in order to have an error-free customer database
even if a transmission error should occur.
The following options are available for applications connected to HiPath 3000 Manager E via
the OLE port:
● Read CDB with IVM. The CDB is load with IVM.
● Read CDB without IVM. The CDB is loaded without IVM.
Load IVM data, System -> PC, PC -> System
If IVM Download is activated (default setting), the IVM data is transferred from the communi-
cation system to the PC using the System -> PC button. If IVM Download is deactivated, only
the CDB is transferred.
If IVM Upload is activated (default setting), the IVM data is transferred from the PC to the com-
munication system using the PC -> System button. If IVM Upload is deactivated, only the CDB
is transferred.
Delta mode
Delta mode can only be activated when a CDB read from the communication system was load-
ed. The option has a gray background when a customer database has been loaded from the
hard disk.
7
When the CDB is downloaded from the communication system, it is always assigned
the file name lastload.kds. In the process, all changes that were undertaken on the
existing lastload.kds file are overwritten. If the existing file should be retained, it must
be renamed beforehand (e.g., via Save Customer Database As).