Specifications

file.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
8-41
Nur für den internen Gebrauch File Menu
Transfer
8.19.5 Maintenance | Out of Service
Out of Service can be used to display all station and line ports available in the communication
system.
8.19.5.1 Out of Service table
Slot/Port column
This column indicates the slot and port where the station or trunk (line) is located.
Call no. column
This is the number assigned to the port.
Name column
This is the name associated with the station or trunk.
Status column
The ports can be either active or inactive based on whether or not there is a valid telephone
or trunk line connected to the port. This terminology is consistent throughout. The ports can
also be In service, which is the default, or Out of service from tool, which means that they
have been blocked via Lock card.
8.19.5.2 Buttons
Block selection, Release selection
The ports listed in the table can be blocked or released using the Block Selection or Release
Selection buttons.
Ports of an IVM or HG1500 cannot be blocked.
Lock card, Release card
Entire cards can be blocked or released using the Lock card or Release card buttons. This
blocks or releases all cards with listed ports. Blocking a card has the same effect as blocking
all its ports.