Specifications

File Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
8-42 HiPath 3000 Manager E, Administrator Documentation
file.fm
Transfer
Read Data
When you click on the Read Data command button, all station and line ports available in the
communication system are displayed in the table.
7
– When blocking U
P0/E
ports, the accompanying physical port is always taken
out of operation. This has as a result that when, for example, a master port
is selected, the accompanying slave port is also taken out of operation.
– When individual mobile telephones of a cordless board are blocked with
Block Selection, the entire board and therefore all mobile telephones are
always blocked. To block individual mobile parts, change the PIN of the ap-
propriate mobile part.
– Note that being In Service is not the same as being Active. For example,
a port status might be: Active, In Service or it might also be Inactive, In
Service.
– To keep from preventing Assistant T activities, the first 2 ports are not
blocked when the first SLMO/SLU is blocked.