Specifications

file.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
8-43
Nur für den internen Gebrauch File Menu
Transfer
8.19.6 Maintenance | Base Station Status (not in the USA)
Base Station Status can be used to display the status for the base stations.
8.19.6.1 Area: UPN port
All U
PN
ports of the associated base stations are listed in the table. A specific base station for
which the status is to be displayed can be selected from this table (in advance data have to be
loaded).
Save
When you click on the Save button, the status of the Cordless Base Stations (BS) connected
to the communication system are saved.
Read data
When you click on the Read data button, the status of the Cordless Base Stations (BS) that
are connected to the communication system are read out.
8.19.6.2 Area: Base station data V1 + V2
Base station The number of the selected base station is displayed.
Software ver-
sion
The software version of the base station is displayed here.
Hardware ver-
sion
The hardware version of the base station is displayed here.
Status The status of the associated port is displayed here.
Possible statuses:
– Port active
– Port not connected
– Port blocked
– Port connected, inactive
– 1st expansion port for … (no. of main port)
– 2nd expansion port for … (no. of main port)
Overload Number of the overload situations on the U
P0/E
interface.
Restarts Number of times the base station was restarted.
Delete The counter is reset with Clear. The Clear button can currently not be activat-
ed; the meter is deleted each time a new query is executed.