Specifications

file.fm

A31003-H3590-M100-5-76A9, 11/2011

HiPath 3000 Manager E, Administrator Documentation

8-45

Nur für den internen Gebrauch File Menu

Transfer

8.19.6.4 Area: Base station data V2

L1/L2 Error Number of L1/L2 errors that occurred in the base station.

Abnormal Re-

lease

Number of interrupted calls in the base station.

Calls per BS Number of calls made via the base station (both incoming and outgoing).

Hopping Mode CMI Version 2 systems always operate in fast hopping mode, i.e., all fre-

quency – time slot pairs can be used. This provides for 120 duplex channels.

In the case of base stations with slow hopping, only every second frequency

– time slot pair can be used. This means than only 60 duplex channels are

available. All cordless version 1 systems operate in slow hopping mode.

BHO Count OK Number of successfully completed intracell handovers (bearer handovers

BHO), i.e., successful transfer of the carrier frequency and/or the time slot

within a radio cell.

Not supported by Hicom cordless EM V2.1 and V2.2. Although the meter is

not supported, the Bearer Handover feature is available.

BHO Count not

Number of intracell handovers that failed (bearer handovers BHO).

Not supported by Hicom cordless EM V2.1 and V2.2. Although the meter is

not supported, the Bearer Handover feature is available.

Intra SLC han-

dover

Number of handover procedures within the SLC16 card. This is counted in

the new base station.

Inter SLC han-

dover

Number of handover procedures between SLC16 cards. This is counted in

the new base station.

Not available up until and including Hicom 150 E Office Rel. 2.2 of the

Hicom 150 E Office.