Specifications

File Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
8-48 HiPath 3000 Manager E, Administrator Documentation
file.fm
Transfer
8.19.9 Maintenance | Call Monitoring
Call Monitoring is used for
– Monitoring the call establishing or tare down of trunk- and station ports
– Recording of special events (com_dia.h) and change of states (SUB states)
– Recording of dialed digits and transmitted calling party number.
8.19.9.1 Call Monitoring table
No column
Each column will be numbered sequentially beginning with the number 1.
Time column
Time when the event or changing of state happened in hours, minutes and seconds in the coun-
try specific time format.
Access column
Subscriber or trunk number (Slot/port) of the monitored port.
Status column
Status of the port (definition of the status in statecom.h).
The status is displayed in plain text (IDLE, CALL REQUEST, …).
Status Meaning
Idle Port is idle
Call Initiated Port is ready
Overlap Sending External sending of digits
Outgoing Call Proc End-of-dialing
Call Request Waiting for ALERT
Call Present Port is ringing
Active Port is in an active call
Hold Port is on Hold
Disconnect Indication Request to disconnect active call
Direct Port is in Speaker Call/Handsfree answerback mode
Intrusion Port is activating Override