Specifications

Introduction Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
1-10 HiPath 3000 Manager E, Administrator Documentation
intro.fm
Basic Functions
1.3.4 Security (User administration)
User administration
The access parameters between the program and the communication system are defined via
the user administration (File/Transfer/Communication/Security/User administration). Up to
16 users (= administrators) can be entered. A user is identified by his or her name. The estab-
lishment of a user group defines the usage rights of the respective user. Authentication is car-
ried out by means of a password.
Two user names and the user groups linked to them, which are relevant for the administration,
are preset in the default setting of the user administration:
– User name “31994” with the user group “Service”
As long as no other user groups are set up, this user group has the access rights to all
administrable system data and the execute rights for all actions available in the system.
Excluded from this are access rights that are reserved for development (see user
group “Development”).
– User name “633423” or “office” with the user group “Customer”
The user group ‘Customer’ has access to all data that is intended for administration by
the customer (see also further below).
– User name “*95” with the user group “none”
As long as no other user groups other than the one described above are set up, it is
possible to administer customer-relevant data using the telephone with this user group
(due t o compatibility reasons with Hicom 150 E Office Rel. 1.0). This entry has no
meaning for the communication system administration with HiPath 3000 Manager.
User access rights can be determined by specifying one of the 6 user groups available.
– User group <none>
This user group has no meaning when using the program for administration.
– The user group User admin
This user group has the access rights to the User administration dialog, where the
user and the linked user groups are set up.
– The user group Revision
This user group has the access rights to the Security protocol dialog.
– User group Service
By default, only the user “31994” exists (see further below).
– The user group Administration (Customer)
By default, only the user “633423” exists (see further above).
This user group can access data that is intended for administration by the customer.
This customer data can, however, also be additionally set up by the service. An excep-
tion is the confidential customer data, which may be handled only by the customer: