Specifications

file.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
8-53
Nur für den internen Gebrauch File Menu
Transfer
8.19.11 Maintenance | V.24 Status
V.24 Status can be used to query the status of a V.24 interface on the central board or a terminal
adapter of a system telephone.
8.19.11.1 Area: Interface selection
Is used to select the wanted interface. A difference can be made between a V. 24 interface on
the central board or a terminal adapter of a system telephone. The V.24 interface can be select-
ed via the V.24 port drop-down list. A terminal adapter can be selected by entering the station
number of the system telephone, to which the terminal adapter has been connected.
8.19.11.2 Area: Line status
After clicking on the Read data button, the states are displayed.
– Line status = 1 means "Line active"
– Line status = 0 means "Line inactive"
The individual lines are assigned as follows:
– DTR: Communication system
– DSR: Telephone
– RTS: Communication system
– CTS: Telephone
Two status examples are given in the following:
Example 1: Port open:
–DTR: 1
– DSR: 0
–RTS: 1
–CTS: 0
Example 2: HiPath 3000 Manager Online:
–DTR: 1
– DSR: 1
–RTS: 1
–CTS: 1
8.19.11.3 Area: Monitoring V.24
The Start and Stop buttons can be used to start or stop monitoring. In case of started moni-
toring, the incurred time and the number of sent/received bytes is displayed.
After monitoring has been stopped, the transferred bytes can be viewed by activating the but-
tons Hexadecimal, ASCII or Hex + ASCII. For this purpose, an external text editor (default is
Wordpad) is started; this editor can also be used to store or print data. The desired editor can
be configured via the File ass_150e.ini.