Specifications

file.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
8-85
Nur für den internen Gebrauch File Menu
Transfer
8.19.32 Maintenance | OpenStage Phones: SW distribution
SW distribution enables the software of individual or several selected terminals and extenders
of the OpenStage family to be updated at a preconfigured time.
To access the dialog box, click the SW distribution button in the OpenStage Phones tab.
The Read Data button is used to read in, and display in the table, the data of the OpenStage
terminals and extenders for which a new software version was made available. OpenStage ter-
minals and extenders for which the software is to be updated manually must be selected here.
The time at which to update the software (immediately, time-controlled, or after the next reset)
is selected using APS -Activation. Whether Auto Upgrade is activated in the customer data-
base is displayed here for information, as this setting affects the software distribution. If Auto
Upgrade is activated, an automatic software update will be done for the selected OpenStage
terminals and extenders at the preconfigured time. Manual software updating is done using the
Upgrade button.
The data of the OpenStage terminals and extenders selected in the table can be stored using
the Store Data button. The LogFile button can be used to query a log file in which all executed
actions are recorded.
8.19.32.1 Phone family area
The OpenStage terminals visible in the table can be selected here. A manual software upgrade
can be executed only for the visible terminals. An automatic software upgrade is, however, not
affected by this setting.
8.19.32.2 Actual version in MMC area
This displays the current software versions for OpenStage terminals and extenders that are
stored on the MMC of the system.
8.19.32.3 APS-Activation area
The software update for the OpenStage terminals is executed as soon as the corresponding
resource is available. The switchover time that follows that is determined by the following set-
ting:
>
Before carrying out the software upgrade for the OpenStage terminals, the new soft-
ware version must be made available by using File | Transfer | SW Transfer and
File| Transfer | Communication | APS Transfer.