Specifications

file.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
8-89
Nur für den internen Gebrauch File Menu
Transfer
8.19.33 Maintenance | OpenStage Phones: Trace
Use Trace to configure appropriate trace settings and transfer them to the OpenStage TDM
telephone you want to trace. Trace data (trace profiles) can be downloaded from the telephone
to the PC for logging and analysis (e.g., troubleshooting) after the trace routine.
The Trace function is only available on OpenStage 60 TDM and OpenStage 80 TDM tele-
phones.
To access the Trace dialog, click the Trace button on the OpenStage Phones tab. Select the
OpenStage TDM telephone you want to trace in the OpenStage drop-down list. Use the Se-
lection table to define the Trace ID and, in the same line, the Trace Level required for the Trace
ID. Then the flags and parameters in the Error Trace and Core Dump Configuration area can
be activated (e.g., Delete Core Dump) and defined (e.g., trace duration Timeout (Minutes)).
Use the PC -> Phone button to transfer the trace settings from the PC to the OpenStage TDM
telephone you want to trace. You can now start tracing the stationary OpenStage TDM tele-
phone, for example, with a call. When the trace finishes on the OpenStage TDM telephone, go
to File Name and select the PC folder where you want to transfer the OpenStage TDM tele-
phone’s trace data for analysis (troubleshooting, for instance) on the PC. Use the Phone -> PC
button to transfer the trace data to the PC folder. You can then forward the trace data to Admin-
istration/Development for analysis.
8.19.33.1 Trace Area
OpenStage
This displays all active OpenStage TDM terminals. Open the drop-down list and select the
OpenStage TDM telephone whose trace data (trace profiles) you want to transfer to the PC for
analysis (troubleshooting, for instance) after the trace routine.
File Name
Click Browse and select the PC folder (for example, C:\temp\OPERA\ trace99.tar) where the
OpenStage TDM telephone’s trace profile (for example, binary data) should be transferred for
analysis (troubleshooting, for instance).
Phone -> PC button:
Use this button to transfer an OpenStage TDM telephone trace to the PC folder that you select-
ed under File Name.
8.19.33.2 Trace-Process Area
You can specify the components (Trace-ID) and Trace-Level for the trace process in the table
here, transfer the trace settings from the PC to the selected OpenStage TDM telephone and
perform the error trace and core dump configuration.