Specifications

settings01.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-3
Nur für den internen Gebrauch Settings Menu
Settings | Netwide Data
9.1.1 Stations - Netwide Data
The Stations tab consists of a table, which is divided into the columns described below. Values
for call numbers, DID numbers, and names can be altered by selecting individual fields.
Node call number
If open numbering is set, the call number of the node is displayed here. A station is reached
from an external telephone by dialing this node number, followed by the call number or the DID
number.
As of HiPath 3000/5000 V5.0, the node number is no longer placed before the DID automati-
cally, regardless of whether the recipient is a local CO or tie trunk. The node number must
therefore be entered as the PABX number (see Areas: PABX number incoming and PABX num-
ber outgoing).
9.1.1.1 User-defined columns
The first three columns can be defined by the user. The system offers standard settings for the
first two fields, but they can also be overwritten.
Call no. (Call number) column
The Call no. column contains the internal call number of the relevant station. This number may
contain a maximum of six digits.
DID (direct inward dialing number) column
The DID number assigned to the corresponding extension is entered in this column. This num-
ber may contain a maximum of 11 digits. This is the call number used for DID and CorNet.
Settings | Netwide Data | Stations
>
You can also configure the stations via the new Station view.
>
If a call number if modified in this table, the same modifications must be made in Call
Management (Settings | Incoming calls).
The tables under Settings | Incoming calls are updated immediately once changes
have been saved for the Call no. and DID fields.