Specifications

settings01.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-5
Nur für den internen Gebrauch Settings Menu
Settings | Netwide Data
Type column (sixth column)
Can only be changed by physically reconfiguring the communication system.
The type of telephone connected to the station port is automatically specified by the communi-
cation system. If a telephone is not connected, No Port is displayed in the column. If an analog
telephone is connected, the entry "P.O.T." appears in the column.
– No Port, i.e., no telephone connected
– P.O.T., i.e., analog telephone connected
– System telephone connected
–S
0
station
Access column
Can only be changed by physically reconfiguring the communication system.
The name, number and slot of the station system card is displayed here. This column also in-
dicates whether the port is a master or a slave.
System column
Can only be changed by physically reconfiguring the communication system.
This column indicates the network node where the station is located.
9.1.1.3 Network name field
The network name designates the name of the networked system. The configuration is saved
under the network name with the suffix *.net. The network name has no significance for the op-
eration of the networked system, but is only used for transparency.
9.1.1.4 Buttons
LCR Support
LCR Support is intended only for Customer Service.
Requirements for LCR Support:
– HiPath 5000 RSM/AllServe
– MS Excel (any version as of Excel 97) must be installed on the PC
>
This column is often not fully visible. In order to see all entries, use the horizontal
scroll function or reduce the width of the other columns by moving the column sep-
arators.