Specifications

Settings Menu Nur für den internen Gebrauch

A31003-H3590-M100-5-76A9, 11/2011

9-10 HiPath 3000 Manager E, Administrator Documentation

settings01.fm

Settings | Netwide Data

9.1.3 Resource Management (HiPath 5000 RSM/AllServe)

Resource management enables you to manage the resources (MOH/Conference) in a net-

work system. If a network system includes individual communication systems or groups of com-

munication systems that are linked via a WAN, there may not be enough bandwidth available

to allow the use of the conference resources in one WAN segment, for example, by a commu-

nication system in another WAN segment. In such cases, resource management can be used

to build groups which then use only the resources in their own WAN segment and do not access

the resources in another WAN segment. If all the communication systems in the network are

linked via a WAN, then resource management has no practical use.

9.1.3.1 Table

When a network CDB is loaded, all system CDBs associated with the network CDB are shown

in the table.

Node IP address column

Shows the HIP IP addresses of all nodes included in the network CDB.

In an IP network, the supply of IP addresses is not supported here.

Node ID column

Shows the IDs of the corresponding nodes.

CDB Name column

Shows the file name of the corresponding system CDB (node).

WAN 1, ... WAN 5

Under WAN1 to WAN 5 you can specify how the individual nodes should mutually use their re-

sources. You can assign up to 5 groups (WAN segments) to each node. For each node, you

can specify to which group it should belong and thus from which node it should use the resourc-

es. If a node is not assigned to any group, only the resources within the node itself can be used

for that node. In order to use the resource management for a node, the node must be assigned

to at least 2 WAN segments.

Settings | Netwide data | Resource Management