Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-12 HiPath 3000 Manager E, Administrator Documentation
settings02.fm
Settings | Set up station
9.2.1 Subscriber
The Station tab consists of a table, which is divided into the following columns. The values for
the call number, DID number and name can be changed by selecting the individual fields.
The table is often not fully visible. In order to see all entries, use the horizontal scroll function
or reduce the width of the columns by moving the column separators.
This station status can also be printed via Print / Print Preview.
Call no. (call number) column
The Call no. column contains the internal call number of the relevant station. This number may
contain a maximum of six digits.
When a fax or modem station is deleted (i.e., the call number and DID are deleted), the exten-
sion type must also be reset to the default (standard).
DID (direct inward dialing number) column
The DID number assigned to the corresponding extension is entered in this column. This num-
ber may contain a maximum of 11 digits. This is the call number used for DID and CorNet.
When a fax or modem station is deleted (i.e., the call number and DID are deleted), the exten-
sion type must also be reset to the default (standard).
Settings | Setup station | Stations
>
You can also configure the stations via the new Station view.
>
If a call number if modified in this table, the same modifications must be made in Call
Management (Settings | Incoming calls).
The tables under Settings | Incoming calls are updated immediately once changes
have been saved for the Call no. and DID fields.