Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-26 HiPath 3000 Manager E, Administrator Documentation
settings02.fm
Settings | Set up station
9.2.5 Terminal hw sw version
The hardware/software version of the terminals is made up of the current OpenStage SW
versions in MMC and a table, in which the number, the name, the type, the location as well as
the current software and hardware version of the terminals are displayed.
The table is often not fully visible. In order to see all entries, use the horizontal scroll function
or reduce the width of the columns by moving the column separators.
9.2.5.1 Area » Current OpenStage SW Versions in MMC«
The current software version is displayed here which is available on the MMC card for upgrad-
ing OpenStage T devices.
9.2.5.2 Table
Call Number column
The internal number of each IP terminal is displayed here. No number is displayed for IP termi-
nals which have been added to Manager E but which are not yet registered in the system.
Name column
This column displays the name of the station.
Type column
This column displays the terminal type of OpenStage and optiPoint IP telephones.
Column: Current SW Version
The current software version of the OpenStage and optiPoint IP terminals registered on the
system is displayed here. No software version is displayed for IP terminals which have been
added to Manager E but which are not yet registered in the system.
Column: HW Version
The hardware version of the OpenStage terminals which are registered on the system is dis-
played here.
Settings | Set up station | Endpoint hw sw version