Specifications

Settings Menu Nur für den internen Gebrauch

A31003-H3590-M100-5-76A9, 11/2011

9-28 HiPath 3000 Manager E, Administrator Documentation

settings02.fm

Settings | Set up station

9.2.6 Fax/Modem

Fax/Modem should only be configured in cases where the customer has an IP network without

a HiPath 5000 RSM/AllServe server installed. In the HiPath 5000 RSM/AllServe system, the

tables for every involved node are generated automatically and silently (without a visible dialog)

by the server.

The Fax/Modem table is evaluated for fax/modem connections only in the case of an IP net-

work. A maximum of 128 call numbers of fax or modem ports, which are not installed in the own

node but in the networked remote node, can be entered in the table. In the case of an incoming

connection, the A station number is searched in this table. If the number is found there, this

means that a fax or data connection is involved, and the Resource Manager in the own system

can activate the required DSP.

Call no. (call number) column

In the Call No. column, you can enter a call number of up to 16 digits for a fax or modem port

in a networked node.

Fax / Modem column

You can select whether the station number is assigned to a fax or modem port. If no selection

(blank) is made, the station number will no longer be evaluated.

Check column

If the entered call number is not unique within the table (from a digit analysis point of view), a

red arrow appears. The row in question must then be corrected (it is not possible to import an

inconsistent CDB into the system).

All database equal button

All database equal loads the contents of the table into all currently loaded/opened CDBs.

Settings | Setup station | Fax