Specifications

settings02.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-29
Nur für den internen Gebrauch Settings Menu
Settings | Set up station
9.2.7 Emergency
Emergency enables you to control the behavior of the IP Workpoint clients (system cli-
ents) within the framework of the SRS concept ( Small Remote Sites). A detailed description
of the SRS concept can be found in the manual "HiPath 3000/5000, Feature Description".
Small remote sites redundancy
Activate this flag if the SRS concept is to be used.
Emergency text
Enter the text (max. 15 characters) to be displayed on the system clients in the event of an
emergency (failure of the HiPath 4000) here.
Workpoint Clients table
The table shows all the system clients that have been set up.
Call No. column
The internal call number of each station is shown here.
Name column
The name assigned to the station is shown here.
CFSS-Destination column
You can select a forwarding destination for each station via the drop-down list. If the system
client is not working (e.g., because the PC on which OpenScape Personal Edition is running
has been shut down), calls will be forwarded to the specified destination.
The local call number may not be entered as a target. If a station with the same call number is
entered as a CFSS target in another system, this call number must be unique within the system.
It should not conflict with the internal dial plan. A call number of this type must then be assigned
a prefix (or seizure code) that is configured in the LCR dial plan.
Settings | Setup station | Emergency