Specifications

settings02.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-31
Nur für den internen Gebrauch Settings Menu
Settings | Set up station
9.2.8 Mobility Entry (not for USA)
Mobility Entry is used to integrate mobile stations in the HiPath 3000 system. Mobile stations
are GSM phones and home workstations. Mobile stations are therefore treated as internal sta-
tions. A mobile station can make an outgoing call via the system. Incoming calls are signaled
both on the system and on the mobile station.
For Mobility Entry, the Least Cost Routing has to be configured completely and activated. Thus,
an external GSM telephone (mobile call number), which is mapped to a virtual station, can be
reached by an incoming call.
9.2.8.1 Mobile Connection table
The table shows all configured numbers for Mobility Entry. A maximum of 100 entries are pos-
sible.
Stations column
The number of a virtual port or of a dual-mode SIP station is selected here.
Mobile number column
The mobile call number is entered here.
Web feature ID column
The web feature ID defines how the stations should log in on the myPortal web client and my-
Portal entry Widget. Normally, a previously configured basic MULAP is specified here. If the
station has a smart phone but no system phone, the virtual number needs to be entered in-
stead.
Settings | Set up station | Mobility Entry
>
Important: Mobility Entry is not supported behind SIP provider interfaces or in IP net-
works. Therefore, the "Callback" function is not supported either. Mobility Entry is only
enabled for the node to which the CO is connected.
>
The columns in the following row of the table (e.g., 2) can only be filled after the Vir-
tual station and Mobile call number columns have been filled in the preceding row
of the table (e.g., 1).