Specifications

settings02.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-33
Nur für den internen Gebrauch Settings Menu
Settings | Set up station
9.2.9 HXG configuration (V4.0 and earlier)
HXG Configuration is used to configure the station ports of the HG 1500 cards.
9.2.9.1 Area: Selection
HG 1500 Card
The HG 1500 cards plugged into the communication system can be selected via HG 1500
Card.
9.2.9.2 Table: Stations
This table displays all station ports which are free in the communication system and which can
be configured, as well as all configured station ports for this card.
Selected station, System Client, S0 Extension, Setup
If System Client is selected, then all selected station ports are configured as system clients
via Setup.
If S0 Station is selected, all selected station ports are configured as S
0
stations via Setup.
Selected station, Delete
All selected station ports are deleted by pressing Delete.
Configured station
The system clients and S
0
stations configured for the current HG 1500 card are displayed in
this field.
Settings | Set up station | HXGx Configuration
See also:
– Section 9.2.10, “Gatekeeper (V5.0 and Later)”, on page 9-34
– Section 9.2.11, “Gateway (V5.0 and Later)”, on page 9-36
– Section 9.4, “Settings | Lines/networking”, on page 9-50
– Section 10.1.1, “Cards”, on page 10-3
– Section 10.1.2, “Card Configuration | T1 Configuration”, on page 10-7
– Section 10.1.3, “Card Configuration | Card data”, on page 10-8