Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-34 HiPath 3000 Manager E, Administrator Documentation
settings02.fm
Settings | Set up station
9.2.10 Gatekeeper (V5.0 and Later)
Gatekeeper is used to configure the Workpoint clients of the station ports of the inserted HG
1500 boards.
9.2.10.1 Area: Selection
Gatekeeper HG 1500
Under HG 1500 Gatekeeper, select the HG 1500 board plugged into the communication sys-
tem that is configured as a gatekeeper (see also Settings | Network | Gatekeeper).
Enable gateway resources flag
The "Enable gateway resources" flag enables the DSP resources of the selected HG 1500
card. DSP resources are required for B channel connections (voice payload data) between
TDM and IP devices. When the flag is activated, the DSP resource of the HG 1500 card can be
used for voice payload data (requires B channel licenses for the HG 1500 card). To prevent loss
of performance, it is recommended that this flag be deactivated in the case of large IP config-
urations with several HG 1500 cards. HG 1500 then "only" works in gatekeeper mode (to per-
form station registration/deregistration, call signaling, etc.). One gatekeeper is possible for each
HiPath 3000 system. Additional HG 1500 cards then perform the gateway functions.
The following rules must be observed:
In HiPath 3000 systems with a single HG 1500, the "Enable gateway resources" flag must
be activated to facilitate combined gateway and gatekeeper functionality.
In HiPath 3000 systems with several HG 1500 cards, the "Enable gateway resources" flag
is used to define whether the selected HG 1500 only offers gatekeeper functionality or
combined gateway and gatekeeper functionality.
In HiPath 3000 systems with several HG 1500 cards, internal resource management controls
the allocation of calls and traffic to the individual HG 1500s.
9.2.10.2 Table: Stations
This table displays all station ports which are free in the communication system and which can
be configured, as well as all configured station ports for this card.
Settings | Set up station | Gatekeeper