Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-36 HiPath 3000 Manager E, Administrator Documentation
settings02.fm
Settings | Set up station
9.2.11 Gateway (V5.0 and Later)
Gateway is used to configure the S0 stations of the station ports of the inserted HG 1500
boards. ComScendo licenses are not required for S
0
stations.
9.2.11.1 Area: Selection
HG 1500 Card
Under HG 1500 Board, select an inserted HG 1500 board in the communication system that
is not configured as a gatekeeper (see also Settings | Network | Gatekeeper).
9.2.11.2 Table: Stations
This table displays all station ports which are free in the communication system and which can
be configured, as well as all configured station ports for this card.
Selected station, S0 Extension, Setup
Setup can be used to configure all selected station ports as S
0
extensions on the selected HG
1500 board.
Selected station, Delete
All selected station ports are deleted by pressing Delete.
Configured station
This field shows the number of S
0
stations set up for the selected HG 1500 board.
Settings | Set up station | Gateway
See also:
– Section 9.2.10, “Gatekeeper (V5.0 and Later)”, on page 9-34
– Section 9.4, “Settings | Lines/networking”, on page 9-50
– Section 9.10.15, “Gatekeeper”, on page 9-325
– Section 10.1.1, “Cards”, on page 10-3
– Section 10.1.2, “Card Configuration | T1 Configuration”, on page 10-7
– Section 10.1.3, “Card Configuration | Card data”, on page 10-8