Specifications

settings025.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-43
Nur für den internen Gebrauch Settings Menu
Settings | Cordless (Not in the USA)
9.3.2 Cordless | SLC
The parameters for the SLC16 card can be configured via SLC. All cordless cards are displayed
in the system.
9.3.2.1 Table SLC
If a still unconfigured cordless card is detected, the corresponding row in the table is preset with
automatically configured data and shaded in gray. In addition, a message appears indicating
that this data will only be copied to the CDB on clicking Apply. The predefined values are the
SLC16 no. and, for the first cordless card, also the system ID. If the system ID is preset, the
node ID is used. If the node ID should be “0” (if the system consists of only one node), the sys-
tem ID is preset to “1”. If cordless cards have already been configured, their system IDs are
taken as the defaults. The node ID is used for systems with multiple nodes.
Settings | Cordless | SLC
System ID Node ID/System ID of the system.
For systems that have already been
configured, the system ID entered in
the CDB is displayed. This need not
be identical to the node ID, but
should be unique in a network of mul-
tiple systems.
-
Slot Slots of the inserted SLC16 cards -
SLC16 no. Unique system-wide ID number of
the SLC card
configurable
The range of values is: 1-15, 17-31,
33-47, ..., 127 (multiples of 16 are not
allowed).
Number of PPs Number of Portable Parts (PP).
The number of portable parts can be
increased in the Portable Parts area
-
SLC Call no. Unique system-wide call number of
the S
0
extension line
configurable
Access Name, number and slot of the S
0
ex-
tension line
-