Specifications

settings03.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-51
Nur für den internen Gebrauch Settings Menu
Settings | Lines/networking
9.4.1 Trunks
The Trunks mask can be used to view and define basic trunk information and to configure ad-
ditional, specialized trunk information.
The Trunks tab consists of a table that is subdivided into the following columns. The values of
the trunk, SI/Tr, code, route, flags, inactive and type can be altered by selecting individual fields.
If you double-click the field in the Param column and then click Apply, another dialog opens.
9.4.1.1 Table Trunks
Of the seven fields in this mask, four are system-defined (Trunk, Sl/Tr, Inactive, and Type), two
are user-defined (Code and Route), and one provides access to three additional masks (Pa-
rameters).
Trunk column
This is the physical CO trunk that is connected to the communication system. You select the
trunk (line) by clicking on the appropriate line number.
SI/Le column
This field indicates the card type and the slot and port number where a specific trunk is con-
nected to the communication system.
Code column
This is the number that tells the communication system to seize a specific trunk. It is used to
test the trunk or to program a line key.
Route column
In this column, the trunk is assigned a certain route.The names and numbers of the routes cor-
respond to those in the Routes field under:
● Settings | Lines/networking | Routes, and
● Settings | Lines/networking | Routing parameters
The Routes field is used to assign a trunk to a certain route.
Settings | Lines/networking | Trunks
>
Important: If "None" is set in this column for a certain active trunk, system behavior
will not be stable. Also, the system can receive a call on this trunk but the call cannot
be forwarded.