Specifications

Settings Menu Nur für den internen Gebrauch

A31003-H3590-M100-5-76A9, 11/2011

9-62 HiPath 3000 Manager E, Administrator Documentation

settings03.fm

Settings | Lines/networking

9.4.4 Trunks | Parameter/MSI flags

MSI flags can be used to define options for the individual analog trunks listed under Trunks.

To access the dialog box, double-click the Param column on the Trunks tab and select the MSI

flags tab.

If the trunk you have selected is not an analog trunk, only the Trunk field is displayed.

9.4.4.1 Area: Trunk, previous trunk, next trunk

This box shows the trunk code, card, slot number, and physical port of the selected trunk. The

individual slots/ports can be selected using the Next trunk and Previous trunk buttons.

9.4.4.2 Area: Dialing method

This is the CO signaling method.

In order to make a pre-configuration possible, the MSI parameters can be modified indepen-

dently of the trunk type. If analog trunk boards are used, the signaling method is selected au-

tomatically, provided a signaling method has not been explicitly configured. Dial pulsing (DP)

and dual-tone multi-frequency signaling (DTMF) are signaling methods that are manually con-

figurable.

Automatic

The dialing method is automatically detected by the communication system each time the line

is used. This is the default for analog lines.

DTMF

Dual Tone Multi-Frequency is used.

Dial pulsing is used.

Settings | Lines/networking | Trunks | Parameter | MSI flags

MFC-R2 and DTMF cannot be operated in parallel on a board.