Specifications

settings03.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-95
Nur für den internen Gebrauch Settings Menu
Settings | Lines/networking
9.4.11 LCOSS
In the CorNet protocol, the communication system of the partner system is informed of the sta-
tion’s access in the CLASSMARKS information element.
When networking with Hicom 150/HiPath 3000 systems, the access is handed over in Octet 4
of the Classmark-IE in standardized form (refer to the table). No entries for the LCOSS index
are required here.
The communication systems used in the USA (9005, 9006 and H300/USA) don’t evaluate this
standardized access. In this case, the LCOSS index for the respective HiPath system access
must be defined. This LCOSS index helps the partner system to determine the access table
and is therefore also given by the partner system.
9.4.11.1 HiPath classes of service, HiPath 4000 - LCOSS Index
Since the Classes of service in the communication system (call privileges 0-14 of Allowed/De-
nied tables) don’t match the LCOSS in the 9006, the call privileges of the communication sys-
tem can be matched to the LCOSS in the HiPath 4000 in this table.
● Only internal (call privilege 0) matches the LCOSS XX in the 9006/9005
● External incoming (call privilege 1) matches the LCOSS XX in the 9006/9005
● Allowed/Denied Lists (call privilege -13) matches the LCOSS XX in the 9006/9005
● Unrestricted trunk access (call privilege 14) matches the LCOSS XX in the
9006/9005
Settings | Lines/networking | LCOSS
H150 access in
the system
Translation of the system area to
CorNet values for Octet 4
Translation of Octet 4 in
LCOSS index
of the H300/HiPath 4000 in Octet 8
Only internal 0x00 Unknown class of service can be set in CDB
Incoming ext. 0x02 Can access public network can be set in CDB
Allowed/denied list 0x06 Can access local public net-
work
can be set in CDB
Full access 0x0E Can access long distance
public network
can be set in CDB