Specifications

settings03.fm

A31003-H3590-M100-5-76A9, 11/2011

HiPath 3000 Manager E, Administrator Documentation

9-97

Nur für den internen Gebrauch Settings Menu

Settings | Lines/networking

9.4.12 PRI (US only)

Slot / port field

Here you can select the slot / port of a PRI card.

Protocol field

In this field the adjusted protocol is shown.

Frame / Line / Encode field

Here it can be selected the Layer 1 parameters for physical encoding of the line. There are only

two choices, because it is not allowed to mix the parameters. Most new lines support ESF (Ex-

tended Superframe Mode) with a max. data throughout of 64 kbit / sec.

Older equipment and some special installations work in SF (Superframe Mode) with a max.

data throughout of 56 kbit / sec.

ISDN provider informs customer whether or not a line can operate in ESF mode.

The meanings of the other abbreviations are the encoding type (B8ZS: Bipolar 8 Zero Substi-

tution or ZCZ: Zero Code Suppression) and the D – channel encoding (normal or inverted).

B-channels field

Here is shown the used number of B-channels.

Inwats Duwa field

Dependent on a trunk group an INWATS DNIS (Dialed Number Identification Service) port is

assigned to a DID port. This DID port should be configured as a pseudo port, this means that

it is locked for basic DID. The entries in the CM tables are valid for the INWATS DNIS port.

CBC-trunk group field and CBC-pool field

These fields allow to install a CBC-pool. One CBC-pool can exist of up to eight services. In the

field CBC-trunk group the different CBC-access codes can be configured. In the field CBC-pool

the according service can be configured.

Settings | Lines/networking | PRI