Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-98 HiPath 3000 Manager E, Administrator Documentation
settings03.fm
Settings | Lines/networking
9.4.13 QSIG features (not in the USA)
In a network consisting of several communication systems, any connection information that oc-
curs (CDRC data) in the PABX satellite systems is sent to a fixed communication system in the
network. For this purpose, the call number of the destination system (call number of central re-
cording system) to which the connection data is sent is configured in each communication sys-
tem.
9.4.13.1 Area: Own system data
This data identifies your own communication system in the network. The data applies to both
busy signaling and for connection data routing.
System number
In a network consisting of several communication systems, each communication system has
its own system number. If the communication system is networked with such communication
systems, and you wish to use the QSIG features, the system numbers (1-255) must also be
administered here for compatibility reasons.
Group number
Stations can be divided into groups in the communication systems. They are assigned a unique
group number. This type of grouping does not exist in the communication system. However, for
compatibility reasons, the group numbers (1-40) must also be administered here.
9.4.13.2 Area: Inter-system busy signaling
This data defines a communication system where centralized busy signaling is used. The sys-
tem can be either the PABX or a PABX satellite system.
System no. target system
The system number (1-255) of the target system is defined here.
Call no. target system
Call number of the communication system that is set up as a central recording system.
Settings | Lines/networking | QSIG features