Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-100 HiPath 3000 Manager E, Administrator Documentation
settings03.fm
Settings | Lines/networking
9.4.14 IP Trunks for HG 1500
IP Trunks is used to configure the trunks for the inserted HG 1500 boards.
9.4.14.1 Area: Selection
Gatekeeper HG 1500
Under HG 1500 Gatekeeper, select the HG 1500 board plugged into the communication sys-
tem that is configured as a gatekeeper (see also Settings | Set up station | Gatekeeper).
Enable gateway resources flag
This flag is used to free up the gateway resources from the gatekeeper card for the system.
9.4.14.2 Table: Trunks
The table shows all the lines that have been set up for the HG 1500 board.
Number, Add
The number of trunks to be newly configured are specified here. In total, up to 8, 16 or 64 trunks
can be configured depending on the board. A higher number of trunks will be ignored.
Options:
● In HiPath 3000 V5.0 and higher, trunks are no longer assigned on a group basis but on a
system basis
● In HiPath 3000 V6.0 SMR09 and later, you can choose between the following options when
adding trunks:
– SIP Provider 1 ... 4
–Trunking
– Ext. Registrar
– Ext. Gatekeeper
Each of these options is assigned a separate route.
Settings | Lines/networking | IP Trunks
7
These trunks must be assigned to the last route. See Settings | Lines/networking