Specifications

settings04.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-107
Nur für den internen Gebrauch Settings Menu
Settings | Least Cost Routing
9.5.1 Flags and COS
The automatic LCR is activated via Flags and COS and the LCR authorization for each indi-
vidual station determined.
9.5.1.1 Class of service table
Call No. (call number) column
All call numbers in the communication system are listed in this column.
Name column
The station names that are allocated to the call numbers are listed here.
Class of service column
An LCR class-of-service (1-15) can be assigned to each station which is evaluated by means
of the route table when a route is being seized. The assigned level must be equal to or greater
than the level associated with the Route group selected to gain access to the service.
9.5.1.2 LCR authorization codes table
The authorization codes or P.I.N (Personal Identification Number) allocated to the individual
network providers are transmitted together with the call number.
Index column
Consecutive digits are entered here in accordance with the respective network provider. In the
dial rule, the entries M1-M16 refer to index 1-16.
P.I.N. column
Sixteen authorization codes of not more than 16 characters (ASCII characters) can be entered
for the various network providers.
9.5.1.3 Area: LCR - flags, Activate LCR
Automatic least cost routing can be activated with Activate LCR.
Settings | Least Cost Routing Flags and COS