Specifications

settings05.fm

A31003-H3590-M100-5-76A9, 11/2011

HiPath 3000 Manager E, Administrator Documentation

9-125

Nur für den internen Gebrauch Settings Menu

Settings | Incoming calls

9.6.1 Call Pickup

Call pickup groups can be created via Call pickup. When stations are collected into call pickup

groups, a call to any member of the group is signaled to all members. However, the extension

that is being called is the only station that will actually ring. The call is signaled to other mem-

bers initially by a flashing LED next to the pickup key and, on display-model system telephones,

by a display message. Then, if the call is not answered after a specified period of time, a tone

sounds at all of the member stations. Provided the tone has not been deactivated via

Settings | System Parameters | Flags with the Warning signal for call pickup groups option.

9.6.1.1 Call pickup group

They are numbered Group 1, Group 2, Group 3, and so on. You select the group number by

clicking on the number you want to use in the Call Pickup Group list.

9.6.1.2 Selection and Members table

Selection contains the stations of the communication system.

Members contains the stations of the selected call pickup group. A station can only be a mem-

ber of one call pickup group.

To assign a station to a call pickup group, select the relevant station in the Selection table and

add it to the Member table with the -> button. The group membership is then displayed in the

Group column of the Selection table.

To delete a station from a call pickup group, select the relevant station in the Member table and

delete it with the <- button from the Member table.

Settings | Incoming calls | Call pickup