Specifications

settings05.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-127
Nur für den internen Gebrauch Settings Menu
Settings | Incoming calls
the day and night service. S
0
lines are evaluated only when no day/night intercept position (see
Intercept / Attendant) has been set up. For example, this is the case for communication systems
with different ISDN trunk connections/call numbers and different attendant consoles.
To delete an entry from the Station/groups: line assignment table, select a station and then
drag it to the Recycle Bin.
Access column
This is the name of the card associated with the trunk.
Day Call no. column
During business hours, the communication system refers to the Call Destination List assigned
to this station to see which station number to ring.
The entry of the call number for the day or night service is independent of the intercept position
and can be seen as a direct dialing of the station with an S
0
connection.
The intercept for day and night service is defined in the Intercept Position field via Intercept /
Attendant. If this entry is deleted, the intercept position is assigned using the Ringing assign-
ment per line table (day or night).
Name of the day column
This is the name associated with the call number in the Day Call no. field.
Night Call no. column
When night answer (assign night answer) is activated, the communication system refers to the
Call Destination List assigned to this station to see which station number to ring. For most busi-
nesses, night answer is activated during weekends, as well as during non-business hours
throughout the week.
Night destinations to be reached via analog trunks are entered here. However, these destina-
tions are only activated if "no destination" is entered for the intercept destination in the schedule
under Settings | Classes of service | Autom. night service.
The entry of the call number for the day or night service is independent of the intercept position
and can be seen as a direct dialing of the station with an S
0
connection.
The intercept for day and night service is defined in the Intercept Position field via Intercept /
Attendant. If this entry is deleted, the intercept position is assigned using the Ringing assign-
ment per line table (day or night).
Night Name column
This is the name associated with the call number in the Night Call no. field.