Specifications

settings05.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-133
Nur für den internen Gebrauch Settings Menu
Settings | Incoming calls
9.6.4 Groups/hunt groups
Groups/Hunt groups is used to create groups and hunt groups for which multiple stations can
be reached under one call number each. This call number can be also a code. Within each
communication system, certain call numbers are reserved for groups or hunt groups, and can-
not be used for individual stations. The last 60 groups can also be used for UCD applications.
A station can belong to several groups/hunt groups. But, groups cannot be entered as members
of other groups (Exception: Basic MULAP and Executive MULAP groups can be recorded as
members of hunt groups.). External call numbers can be entered, too.
DECT-Light
If system telephones and mobile telephones are configured in a group, the mobile phones must
be configured first in the case of DECT-Light (e.g., in a HiPath 3300/3500).
Rules/restrictions for IVM hunt groups
A single IVM hunt group has to be comply with the following rules:
● The hunt group is the first of all group (Index 1 in the Group table, see below).
● All members of the hunt group correspond to ports which belong to IVM slots. Not all ports
have to be added but ports from other cards cannot be contained.
● The IVM hunt group has to be set to "linear" or "cyclic".
● Only groups of the MULAP type (Basic-MULAP or Executive MULAP) can be added to the
IVM hunt group.
● If a Mobile Connect station exists in the MULAP group, the group cannot be added to the
IVM hunt group.
● Once the MULAP group is already added to a IVM hunt group, the members of the MULAP
group cannot be modified.
After a hunt group has been set up with IVM stations, download to the IVM is started automat-
ically after the CDB has been transferred to the communication system.
Settings | Incoming calls | Groups/Hunt groups
>
Important: For HiPath Xpressions Compact Mobility, the IVM hunt group has to
use index 1, i.e., it is the first group in the Group table.
The corresponding number of ports from IVM cards with up to 24 channels is
only supported for the first group.