Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-134 HiPath 3000 Manager E, Administrator Documentation
settings05.fm
Settings | Incoming calls
9.6.4.1 Group table
Group contains the parameters for the groups/hunt groups.
Index column
Index of the group. The index is also displayed when checking for potential conflicts (Check but-
ton).
Call No. column
The call number for the respective group can be specified here.
DID column
You can enter a direct inward dialing call number for each call number in the DID (Direct Inward
Dialing) column. In this case, direct inward dialing means that an external station reaches a
hunt group with its call number + the direct inward dialing call number.
Name column
You can define a name for the group in the Name column. Groups / hunt groups are frequently
named for some aspect that the stations have in common. Examples: "Sales", "Support", "Lo-
gistics". When there is a call, the name of the called hunt group appears on the display panel
of the telephones.
Type column
Linear Incoming calls ring first at one station and then another in the sequence in
which the members were entered in the group table. Incoming calls always
start at the first group station and are passed along to the next station until a
free station is found.
The time between the calls is the same as the RNA time.
Cyclic Incoming calls ring first at one station and then another in the sequence in
which the members were entered in the group table. In this case, each new call
starts at the location where the last call ended.
Group Incoming calls are signaled at all available stations simultaneously. (An avail-
able station is one that is not busy.)