Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-136 HiPath 3000 Manager E, Administrator Documentation
settings05.fm
Settings | Incoming calls
Tel. directory column
This option determines whether the call number of the group is recorded in the telephone di-
rectory.
Check
Note that this mask also offers a Check button so that after you have finished defining your
group, you can check to see if there are any conflicts.
External destinations
The Groups/Hunt groups | External destinations dialog box is displayed in order to set up ex-
ternal destinations.
9.6.4.2 Selection and Members table
Selection contains the stations of the communication system.
Members contain the stations of the selected group.
To assign a station to a group/hunt group, select the relevant station in the Selection table and
add it via the -> button to the Member table. In the Selection list box, an asterisk (*) next to the
station number indicates a port that did not yet have a station attached when the customer da-
tabase was downloaded.
To rearrange the stations in the Members list, use the up arrow or down arrow buttons (up or
down) that are to the right of the Members list). For MULAPs, the order is only relevant in con-
nection with call pickups. When multiple members of a MULAP also belong to a call pickup
group, then the last member of the MULAP is displayed to the members of the call pickup group
on calling the MULAP.
To remove a station from a group/hunt group, select the relevant station in the Member table
and delete it via the <- button from the Member table. A MULAP must have at least one master
or executive. This is why the last master/executive cannot be removed unless it is the last re-
maining member of the group. Members in this MULAP originating in a team/top cannot be de-
leted here. They must be deleted from the Team/top.
In MULAPs, master or executive stations are indicated by a + sign. The first member to be add-
ed becomes master or executive automatically.
Parameter column
The Parameters column shows the parameters for the MULAPs in abbreviated form:
– M : Master
– C : Executive
– R : Acoustic call
– A : Automatic seizure outgoing