Specifications

settings05.fm

A31003-H3590-M100-5-76A9, 11/2011

HiPath 3000 Manager E, Administrator Documentation

9-139

Nur für den internen Gebrauch Settings Menu

Settings | Incoming calls

Automatic seizure outgoing (A)

This option means that when the receiver is lifted, all calls are automatically dialed via the MU-

LAP. If a station has not been set up for the Automatic seizure outgoing option, he/she must

press a MULAP key to enable dialing. This is why a station can only set ’Automatic seizure out-

going’ for one MULAP. When the option has been set for one MULAP, it is deactivated automat-

ically for all other MULAPs.

The rule that all masters/executives in a MULAP have the same automatic seizure outgoing

also applies (this is adjusted automatically).

If MULAPs with the same master exist, only the MULAP with the set including subsets of mas-

ters can obtain automatic seizure outgoing. This is why it may not be possible to set this option.

This option is set automatically for the master of a newly-created MULAP.

Acoustic call (R)

The acoustic call can be switched on or off.

No automatic incoming call acceptance (K)

When a MULAP call is signaled acoustically, the call is usually answered when the receiver is

lifted. If this option is set, the call must be requested by pressing the MULAP key.

This option is always the same for a station in all MULAPs. The option cannot be set for termi-

nals without a MULAP key (e.g., OFEs, Cordless, S

Automatic privacy release (P)

If this option is set, a member of a MULAP group can join the call. In other words, a conference

is initiated in this case.

Default values: the option is automatically enabled for the USA, but disabled by default for all

other countries.

This option only applies to optiPoint 500, optiPoint 600 and OpenScape Personal Edition.

9.6.5.3 Area: Member keys

MULAP key set up

Offers the option to:

– check whether a MULAP key has been created on the device or the console of the de-

vice,

– delete or add a MULAP key.

The key is set up automatically when a MULAP is created.