Specifications

settings05.fm

A31003-H3590-M100-5-76A9, 11/2011

HiPath 3000 Manager E, Administrator Documentation

9-143

Nur für den internen Gebrauch Settings Menu

Settings | Incoming calls

9.6.7 Groups/Hunt groups | External destinations

External destinations is used to enter call numbers in a subsystem and a CO. If group stations

are also external stations, this group can be called by a station without CO call privileges. How-

ever, the external stations will be excluded.

External destinations can be included in a cyclical or linear hunt group, and entered in a no an-

swer group. UCD groups and MULAPs cannot be used for this purpose.

9.6.7.1 Area: Group

The name and call number of the selected group is displayed.

9.6.7.2 Members table

All internal and external stations in a group are listed.

9.6.7.3 Area: External destinations

The external destination can be entered here, where the call number may contain up to 6 digits

for seizing the line and 25 digits for dial information.

9.6.7.4 Close button

The Close button closes the dialog and returns you to the Groups/hunt groups tab. It is only on

this tab that any changes that were made can be actually applied.

Settings | Incoming calls | Groups/Hunt groups | External destinations

A route must be entered for each external destination (call number). Otherwise, the

applicable hunt group cannot be reached by call forwarding from an internal sub-

scriber.