Specifications

settings05.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-145
Nur für den internen Gebrauch Settings Menu
Settings | Incoming calls
9.6.8.2 Area: Key assignment to team/top group
To first/second console button
Add-on devices are added automatically as necessary and the keys are assigned to fixed po-
sitions. This means that all keys are always set up and any already-existing keys are overwrit-
ten. This makes it possible to always return to a fixed starting position.
For members of a team, MULAP keys and direct dial keys are created for every MULAP in the
team, and a group call on/off key is also created.
For members of a Top, MULAP keys and direct call keys are created for every MULAP, and in-
tercept keys are also created for every executive MULAP. A group call on/off key is also created
for the secretaries.
Note:
The key assignments on the system telephones are not the same. In order to have the proper
assignment, it is necessary to first read the CDB (System -> PC) or to select the correct device
type under Key programming. If the terminal is subsequently swapped or modified under "Key
programming", this button can be used to always revert to the correct status.
The use of this button for optiPoint 500 Advance phones up to and including HiPath 3000 V3.0
SMR1 is not recommended. It results in unusable key assignments, which can, however, be
corrected manually.
To first free key button
Free keys on the basic device and on the add-on devices are assigned. Add-on devices are
added automatically if necessary. Only the newly-added keys are assigned. The same keys are
assigned as for First/second console.
Note:
The key assignments on the key modules are not the same for system telephones. In order to
have the proper assignment, it is necessary to first read the CDB (System -> PC) or to select
the correct device type under Key programming. If the terminal is subsequently swapped or
modified under "Key programming", the assignment may need to be to the adapted manually.
The use of this button for optiPoint 500 Advance phones up to and including HiPath 3000 V3.0
SMR1 is not recommended. It results in unusable key assignments, which can, however, be
corrected manually.
9.6.8.3 Edit team button
Edit team is used to edit the call numbers, the name of the MULAPs, or the parameters of the
individual members in the MULAP. The Edit team/top dialog box is displayed.