Specifications

settings06.fm
A31003-H3590-M100-5-76A9, 11/2011
HiPath 3000 Manager E, Administrator Documentation
9-163
Nur für den internen Gebrauch Settings Menu
Settings | Classes of service
9.7.4.1 Area: Connection matrix
To use the connection matrix, you must first assign each station to a group via Group assign-
ment. By default all stations and all trunks are in Group 1. Since Group 1 is coded with unlimited
access, by default, every station has access to every other station and to all trunks.
Note that the matrix shows one list of groups vertically across the top and another list of groups
horizontally down the left-hand side. At each conjunction there is a box. The type of arrow in
this box indicates the relationship of the two groups to one another.
In a field that points to the same group in both directions, the only options are the double arrow
and the empty field.
Double arrow To create a double arrow, click once on an empty field.
See ITR Example for meaning.
Up arrow To create an up arrow, click twice on an empty field.
See ITR Example for meaning.
Left arrow To create a left arrow, click three times on an empty field.
See ITR Example for meaning.
(empty field) To return to an empty field, click four times on an empty field.
See ITR Example for meaning.
7
An empty field means that no connection is possible. A connection matrix with no
arrows results in a totally disabled communication system.