Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-172 HiPath 3000 Manager E, Administrator Documentation
settings06.fm
Settings | Classes of service
9.7.9 autom. COS changeover
The autom. COS Changeover feature is used to switch classes of service during the day. This
is achieved by assigning specific profiles such as Management, Purchase, Warehouse, etc., to
stations. For each profile, you can configure a separate schedule in which you define what class
of service belongs to a specific segment of the day.
The assignment of a profile to a station is described in Section 9.7.1, “Station”, on page 9-156.
The assignment of a class of service to a COS group is described in Section 9.7.2, “Day or
Night”, on page 9-157.
9.7.9.1 All database equal button
This button is used to transfer the schedule for all profiles to all other open CDBs.
9.7.9.2 Automatic COS Changeover flag
If the autom. COS Changeover flag is not set (the default), the assignment of the class of serv-
ice groups to the stations is not changed. A station can have different class of service groups
for the day and night.
If the Autom. COS Changeover flag is set, a profile is assigned to a station instead of a COS
group. Every profile has a different schedule in which the class of service groups are defined
for specific time periods. The schedule can only be edited if the flag is activated.
Please note, however, that the station is still assigned a COS group for the night. The automatic
COS changeover has no effect here.
Settings | Classes of service | autom. COS changeover
>
The automatic night service feature overrides the automatic COS changeover fea-
ture. The schedule for the automatic COS changeover is only relevant during the
day.
Note that a manual activation of the code lock disables the automatic COS change-
over for the corresponding station.