Specifications

Settings Menu Nur für den internen Gebrauch

A31003-H3590-M100-5-76A9, 11/2011

9-174 HiPath 3000 Manager E, Administrator Documentation

settings06.fm

Settings | Classes of service

9.7.9.6 Context menu

The context menu is activated via the right mouse button:

Copy

Paste

Existing time frames - even over multiple days - can be marked and

then copied. To do this, simply mark the desired area and select Copy

from the context menu. The copied area can then be inserted (past-

ed) at the current position by using the Paste function. Instead of the

context menu, you can also use the standard keyboard shortcuts of

Ctrl+C and Ctrl+V to copy and paste, respectively.

Delete The marked areas are deleted.

Set resolution Defining the time resolution (1, 15, 30 or 60 minutes).

If the selected resolution is too low, the entry will not be visible and

will be shown with an "*" prepended to the COS group (e.g.,

"*Board4"). You can display the complete contents by double-clicking

on the field.

Properties This function can only be called when exactly one field has been se-

lected. The Properties dialog box opens:

– COS group: selection from class of service groups

1 through 15

– Start: The start time can be changed on a minute basis.

– End: The end time can be changed on a minute basis.

If multiple fields were selected, the Properties function will be disa-

bled.

Double-clicking on a field has the same effect as calling the Proper-

ties function via the context menu.