Specifications

Settings Menu Nur für den internen Gebrauch
A31003-H3590-M100-5-76A9, 11/2011
9-194 HiPath 3000 Manager E, Administrator Documentation
settings07.fm
Settings | System Parameters
9.8.3.5 OpenStage Logo Area
Here, you can select the logo that should be loaded into OpenStage 40, OpenStage 60 and
OpenStage 80 TDM connection terminals.
The following options are available:
OpenStage
Logo
Description Caution
Do not down-
load logo
No logo is downloaded to
the OpenStage termi-
nals. All terminals main-
tain the present logo.
This setting makes it possible to operate Open-
Stage terminals with different logos in one system.
Example: Part of a system’s OpenStage terminals
should be loaded with Logo A, and the other part
with Logo B. First, the customer-specific Logo A is
transferred to the system and loaded onto all
OpenStage terminals.
Afterwards, all of the terminals intended for Logo
A are separated from the system.
Then, Logo B is transferred to the system and
loaded onto all of the terminals that are still con-
nected.
In order to prevent the logos from being overwrit-
ten in the future, the setting “Do not download
logo” must be selected.
The terminals with Logo A are again connected to
the system.
Empty logo An empty logo is loaded
onto the OpenStage ter-
minals.
For example, using this setting, you can overwrite
an incorrect logo.
Customer
Logo
The customer-specific
logo in the system is
loaded onto the Open-
Stage terminals.
If there is no customer logo in the system, an emp-
ty logo is transferred.
Siemens The Siemens logo is
loaded onto the Open-
Stage terminals (part of
the default logo file).
If there is no Siemens logo in the system, an emp-
ty logo will be transferred.
Deutsche
Telekom
The Deutsche Telekom
logo is loaded onto the
OpenStage terminals
(part of the default logo
file).
If there is no Deutsche Telekom logo in the sys-
tem, an empty logo is transferred.